Tag Archives: carved top guitar

Making a Carved Top Electric Guitar…Without Any Carving (Part 3)

In Part 2 the carve began to take it’s final form. The recurve was added with the aid of a curved scraper, so we are ready to go back to the random orbit sander. I will burn thru a few more discs of 80 grit, often times using the front edge of the sander to hog off a lot of material where needed. I try to blend from a generally flat surface under the bridge/tailpiece to a smooth sweeping curve down to the recurve and back up to the edge (binding). Here’s what it looks like after nearly all the “carving” is done…

P1010004

The next step is to finish off the neck end. I will fit the neck blank in, without the fingerboard, and check the centerline and the pitch. When this is all correct I simply trace along the fingerboard surface inside the neck pocket and sand down to that line…

P1010018

Now when the neck is attached the fingerboard will follow the carve right up to the correct pitch. The last step for me, besides the eventual rear control cavity routs, drilling, and finish sanding is to make sure the recurve and transition areas are all smooth. I do this with a round rubber sanding block and 80 grit, knocking off any peaks and valleys, especially in the recurve area. You can see here how I try to shape things, like the recurve, based on the tools I have available or the tools I prefer to use. It is no accident that my favorite sanding block and the recurve on the guitar are nearly identical.

P1010031

This entire body was taken from a shaped blank to it’s final form in one morning before lunch. Of course there is a lot of other work to do, but this method allows you to quickly produce a pretty killer carved top body. Here is the finished product…

djb4

djb1

djb3

I hope this has been informative. Cheers!

Advertisements

Making a carved top electric guitar with natural binding…without any carving. (Part 1)

For anyone with some wood working skills and the correct numbers, building a flat top electric guitar is really pretty simple. But a carved top seems like more of a daunting task. Well, it isn’t. With the right tools and a little finesse (and confidence) it can be accomplished quite easily. No CNC, no gouges, no planes. All you really need is a router and router table, a panel cove router bit, a router speed control, a random orbit sander and discs, and a cheap curved scraper. This is a bit of “guerrilla luthiery” for ya’ll…

Start by designing your instrument. Make a full size drawing, measuring carefully along the way. This method will not work well on a guitar shaped like Norway, so rein in the craziness. Just about any “guitar” shaped guitar can be made with this method so if it’s your first time, think Les Paul or PRS, not F5 mandolin! Once you’ve arrived at a shape, cut it out and glue it to a piece of 1/2″ MDF. Then cut and sand to the lines, and there’s your body template. That can then be double stick taped to a body blank and you can cut and sand to the edge of the template. Remember you generally want the edge of the guitar to be in the neighborhood of 1 3/4″ AFTER carving, though it’s possible to make the guitar thinner at the edge, so make sure you plan, draw, and double check your design…numbers are important in this business. Once your body is shaped, you’ll end up with something like this…

P1000939

¬†Once the sides are nice and smooth, you are ready to set up your router table. Everything I used for this project I purchased at Rockler, and all in all, it was not that expensive. First, the router bit…a panel cove bit…
P1000942
As you can see, this bit is big. Too big for the table insert. So it’s chucked into the Porter Cable 690 router OVER the insert. Then you can make a simple table surface from a piece of 3/4″ MDF. Just cut out a hole that is larger than the bit diameter and attach some small blocks to the bottom that will fit into the track on the table.
P1000950
This surface will allow you to adjust the bit height correctly without it grinding on your table insert. Secure it with a clamp or two to keep it from moving into the bit while you’re cutting. Then you can adjust your bit height. This guitar has a 5/8″ quilted maple top. I want to leave 1/4″ of natural binding around the edge, so I simply take a piece of scrap, flatten one edge, and cut out a crude depth gauge for 3/8″.
P1000953
So, now you’ve got your router table set up. BUT, if you turn on the router right now it will sound and feel like the whole thing is going to take off like a helicopter and fly around the room. This might be unlikely, but anything that detracts from your sense of security while building is dangerous. Confidence is important. So I always use a router speed control.
P1000944
With this I can dial up the speed to a level I’m comfortable with. The extra advantage to this is that the speed can be set to a point where you are forced to take small, short, sweeping cuts into the body. If you try to just hog it all out in one pass, the decreased power to the router causes the bit to slow and you will hear it and know to back off. If the sound of the router stays constant, you’ll know you’re cutting the right amount. So, turn on your router at a slow speed and dial it up until it is nearly to take off speed. Then, using some scrap wood, make some test cuts. ALWAYS cut into/against the spin of the router!! NEVER let the bit climb or it will throw your yet unborn guitar thru the wall, or worse!! Now, you’re ready to cut.¬†
P1000954
Lay the body face down, turn on your router, and begin making small sweeping cuts INTO/AGAINST THE SPIN OF THE BIT. Hold the body tight against the table, keeping your hands away from the bit. I generally stop at the tip of the cutaway(s) and just short of the neck pocket on a single cut guitar. These areas I will just do by hand later. So, make small sweeping cuts until you’re able to run the guitar all the way around with the bearing touching the body edge.
P1000955
When you’re done, it will look like this…
P1000966
As you can see, you have a nice even bit of natural binding and a very uniform slope up to the top surface…and the hardest part is done. Look for the rest of the “carving” process in Part 2. Cheers!